Flatbed and Van
Aluminum: 2-piece, 41-inch-deep, plus a 4" front and 4" back taper, extruded aluminum platform (w/ 21 1/2" base and 19 1/2" flipper)
Direct-lift, single hydraulic cylinder, power down, standard ride
Enclosed Unit: All critical components are factory enclosed in the liftgate pump box, providing protection from elements and damage. Bulkhead fittings protect hose connections from being compromised. Easy access for servicing. Pressure Relief Valve: Prevents operator from overloading the platform. Cylinder Mounted Flow Control Valves: Prevents uncontrolled descent of platform.
Control Unit: Moisture resistant toggle switch / deactivates 5 minutes after last operation (helps prevent unauthorized use) / timer reset and on-off button permanently and conveniently located on control unit and positioned under logo and bulls eye respectively. Circuit Breaker: 150 Amp Continuous, 48 VDC Maximum, Watertight, Manual Reset. Mounted in-line with 4 AWG positive battery cable, protects vehicle in the event of an electrical short. Power/Ground Cable: Factory supplied 4 AWG ground cable molded with power cable. Providing a direct connection from the liftgate to the truck battery. Insulation rated for -40°C (-40°F) to 105°C (221°F).
Parallel Arm Pins: 1" OD round stainless steel. Parallel Arm Pin Bushings: Self lubricating composite.
Optional Pendant Control: Timer deactivates 90 seconds after last operation and the Fixed Control deactivates 5 minutes after last operation (helps prevent unauthorized use). Pressure Relief Valve: Prevents operator from overloading the platform.